Disclaimer & Limitation of Liability

Last updated: August 2026

Please read carefully before using generated G-code on any machine.

1. No professional advice

The DXF to G-code converter is provided as a free convenience tool only. It does not constitute professional machining, engineering, or safety advice. You are solely responsible for evaluating whether output is suitable for your machine, material, tooling, and workholding.

2. Verify before cutting

You must, at minimum:

• Review all generated G-code line by line
• Confirm units (mm/inch), X as radius vs diameter, and feed rates
• Run a graphical simulation or dry run when possible
• Start with reduced feed/speed and increased clearance on first real cuts
• Stay within manufacturer limits for spindle, axes, and tooling

3. No warranty

The Service is provided “as is” and “as available” without warranties of any kind, express or implied, including accuracy, completeness, fitness for a particular purpose, or non-infringement.

4. Limitation of liability

To the fullest extent permitted by law, the operator of this website and its contributors shall not be liable for any direct, indirect, incidental, special, consequential, or punitive damages arising from use of the Service or reliance on generated G-code, including but not limited to:

• Machine damage, tool breakage, or workpiece loss
• Personal injury or property damage
• Production downtime or lost profits
• Incorrect dimensions, collisions, or unexpected tool motion

5. Your responsibility

CNC and lathe work is inherently dangerous. You assume all risk. Use appropriate guards, interlocks, personal protective equipment, and safe shop practices. Never leave a running machine unattended.

6. Third-party software

G-code is intended for compatibility with common controllers (e.g. Mach3). Controller behavior, post-processing, and machine kinematics vary. You are responsible for final validation in your environment.

7. Acceptance

By using this site and downloading or running any generated code, you agree to this disclaimer. If you do not agree, do not use the Service.

8. Contact

Questions about this disclaimer: safatezemir@gmail.com